Truma Trumatic S 2200 Gebrauchsanweisung, Einbauanweisung Seite 14

Fastening the
heater
Fig. J1:
Fig. J2:
Warm air
distribution
Fig. K:
Fig. J2:
Gas connection
The gas connection fitting
on the appliance is not to
be made shorter or bent.
Function check
After installation, the seal-
ing tightness of the gas
feed line must be tested in
accordance with the pres-
sure drop method.
Warning information
1. When the heater is be-
ing operated with a roof
flue, particularly when dri-
ving, flue cover T3
must be used,
This may
cause the flame to blow
back and damage the
heater and the vehicle.
body underseal,
fresh air intake vents