Bergstrom TRP SLIMCOOL Benutzerhandbuch Seite 8

SLIMCOOL
EN EN
Thank you for acquiring and trusting our products range. SLIMCOOL is an Air Conditioning
equipment designed and made by Dirna Bergstrom to be used with vehicle´s engine
off, during resting periods under the shade and/or at night. The only maintenance that is
required is a periodical cleaning of the condenser, at least once a year (1).
SLIMCOOL is designed with the most advanced technology to achieve an efficient
output, a reduction in energy expenses and CO
the characteristics which make it unique on the market of Air Conditioning for vehicles.
If the temperature inside your vehicle cabin is too high for you to rest, cool down cabin
with vehicle Air Conditioning during a few minutes, then connect SLIMCOOL to maintain
comfort temperature.
If you have any doubt, please consult your dealer or directly Dirna Bergstrom
Do not forget to ask your dealer for your warranty card.
!
!
(1) To carry out this operation, it is necessary to dismantle upper plastic cover of equipment (9
sheet thread screws) and blow using compressed air. We advise this operation should be carried
out by a Service authorised by Dirna Bergstrom
RECOMMENDATION: for optimal operation of the
unit, it is recommended to start it up occasionally
during the winter months in order to prevent the
joints from deteriorating.
NOTE: If, during assembly, the unit becomes slanted
or the cabin drops with the unit mounted, wait for
at least 60 minutes from the moment the unit is
horizontal before starting up.
emissions to the atmosphere. These are
2
8