Herunterladen Diese Seite drucken

Lightmaxx Vector Lase Serie Bedienungsanleitung Seite 34

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ENGLISH
Operating mode Master/Slave:
If you connect several devices of the same type via DMX, they can be controlled simultaneously
via the master device. Set the desired function on the first device in the chain, the other devices
in the series must now be set as "slave". Now the first device of the chain gives the function to
all other devices and all devices are running simultaneously.
Operation:
Start:
Connect the device to the mains and wait a few seconds until it is ready for operation.
Menu:
Navigation in the menu is via the four menu buttons below the display. Use the "MODE"
button to activate the menu, navigation is via the "UP" and "DOWN" buttons. A corresponding
selection is confirmed with the "ENTER" key. Press the "RETURN" button to return to the
previous menu.

Werbung

loading

Diese Anleitung auch für:

Vector lase 3.3Vector lase 5.0