Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WARNING! (Epilepsy)
Stroboscopic effects (flashes of light) can trigger seizures of epilepsy in some people.
Accordingly sensitive people should be warned and should avoid looking at such effects.
NOTE! (Fire hazard)
Ensure that the unit is not exposed to a direct source of heat and is used away from
open fire. Never cover or tape any ventilation slits or the device itself.
NOTE! (Operating conditions)
Due to its structural characteristics, the device is designed for indoor use. Never expose
the device to rain, moisture or liquids as this may cause damage. Vibrations, dirt or
sunlight can also cause damage - avoid them!
NOTE! (Power supply)
It is essential that you check that the device voltage matches your local mains voltage.
It is strongly recommended that you fuse your mains socket with a residual current
circuit breaker (FI).
If you do not use your device for a longer period of time, disconnect it from the mains.
to minimize danger. The same applies to storm conditions such as thunderstorms or
floods, etc..
Installation:
Be sure to check the unit for damage before using it. Optimally, use the original packaging or
suitable transport or storage packaging to protect the product from dust, moisture, etc. when
not in use.
The unit can be installed upright or suspended. The device must always be attached to a solid,
approved carrier or a suitable surface. The opening in the product bracket must be used to
fasten the device. Always provide a second, independent safety device for the device, e.g. a
safety device.
Work on the device (e.g. assembly) should always be carried out from a stable and permissible
platform. Make sure that the area below you is closed off.
International laser safety regulations stipulate that laser products must be operated in the
manner shown below with a vertical distance of at least 3 meters between the ground and the
vertical laser light. In addition, a horizontal distance of 2.5 meters between the laser light and
the public or other public spaces is required.
ENGLISH
Werbung
