Programming Cup Capacity - K-FEE ONE Betriebsanleitung

Programming cup capacity

setting range
Buttons
[ml]
30 - 100
80 - 200
Switch the appliance on and place the
1
required cup under the spout.
Open the lever and insert the required
2
capsule. Now close the lever completely
again.
2
PROHIBITED Do not reach
inside – injury hazard.
16
K-FEE_One-3-Button_BDA_DE_EN_KV_RZ_20190806_Nullserie.indd 16
factory setting
[ml]
45
105
/ 65
Press the button for the required cup
3
size for at least 3 seconds to activate
programming. Release the button. The
cup will now be filled up with the drink.
Stop the brewing process by pressing the
button again once the required filling
quantity has been reached. This new
setting will be saved automatically.
3
WARNING Very hot water –
scalding hazard.
NOTE It is possible to reset
the appliance to the factory
settings (see P. 17).
min. 3 sec.
Stop
07.08.2019 14:53:27