Roidmi EVE CC Benutzerhandbuch Seite 15

Disassembly and Cleaning of Side Brush
First, turn the main unit over, use a screwdriver to remove the screws, and take out the
side brush. Use a cleaning brush to pick up and cut off the hair and fibre attached to the
side brush, separate them from the side brush, and clean the surface dirt. It is
recommended to replace the side brush every 3-6 months.
Caution:
Please replace the side brush with an original one to avoid damaging the main
•
unit due to product differences.
Please be careful when using a screwdriver to replace the side brush to avoid
•
scratching yourself.
Disassembly and Cleaning of the Two-in-One Water Tank and
Filter
First, press the release button on the two-in-one water tank to take the water tank out.
Open the cover of the two-in-one water tank dust bin and dump the rubbish. Use a
cleaning brush to clean the dust bin. Take out the filter holder, remove the filter, and
clean it with a cleaning brush. Rinse the filter with clean water and allow it to air dry
before using it again to prevent dust clumping. Finally, rinse the two-in-one water tank
dust bin with clean water and allow it to air dry for 24 hours before using it again to
prevent dust clumping.
Caution:
Do not flush or soak the two-in-one water tank while cleaning the two-in-one
•
water tank dust bin.
It is recommended to replace the filter with an original one every 3-6 months to
•
ensure cleanliness.
Disassembly and Cleaning of Mop
First, remove the mopping module from the two-in-one water tank and take the mop off
the mop holder. Rinse the mop with clean water and allow it to air dry before using it
again to prevent dust clumping.
Caution:
Please replace the mop with an original one to avoid affecting the cleaning effect
•
due to product differences.
It is recommended to replace the mop with an original one every 3-6 months to
•
ensure cleanliness.
15