Indicator Status Description
Status Description of Main Unit Indicator
Solid white light: Powered on / working / charging finished / standby
•
Flashing white light: Recharging / connecting to network / firmware updating
•
White breathing light: Powering on / charging (battery power between 20% and
•
100%)
Solid yellow light: Not connected to network
•
Flashing yellow light: Resetting Wi-Fi / abnormal state
•
Breathing yellow light: Charging (battery power below 20%)
•
Light off: Powered off / sleeping / Do-Not-Disturb mode
•
Status Description of Dust Collection Station Indicator
Solid white light: Powered on / main unit fully charged / charging
•
Flashing white light: Dust collecting
•
Flashing yellow light: Dust bag is not in place
•
Light off: Power supply not connected
•
Device Disassembly and Cleaning
Please perform the following cleaning steps when the power is off!
Disassembly and Cleaning of Rolling Brush Components
First, turn the main unit over, lift the buckle and take out the rolling brush cover, and
then take out the rolling brush. Then use a cleaning brush to pick up and cut off the hair
and fibre attached to the rolling brush, separate them from the rolling brush, and clean
the surface dirt. It is recommended to replace the rolling brush every 6-12 months.
Caution:
Turn off the power before replacing the rolling brush.
•
The cleaning brush has sharp blades used to cut through tangled debris that is
•
difficult to clean. Keep the cleaning brush out of reach of children.
14