Do-Not-Disturb Mode; Factory Reset; Firmware-Upgrade - Roidmi EVE CC Benutzerhandbuch

Virtual wall/No-go area
In the app, you can set up virtual walls or no-go areas to prevent the main unit from
entering areas that do not need to be cleaned.
Before using the virtual wall/no-go area function, you need to save the map in the app.
Moving the main unit or major changes in the environment can cause the original map
to become invalid and result in the loss of virtual walls/no-go areas.

Do-Not-Disturb Mode

During the Do-Not-Disturb period, the main unit will not execute resume cleaning and
scheduled cleaning or actively broadcast voice prompts. The Do-Not-Disturb Mode is
enabled by default from 23:00 to 9:00. You can enable/disable the Do-Not-Disturb Mode
or set the time period of the mode.
During the do-not-disturb time period, the indicator will go off after the main unit has
been charged for one minute.
Reset Wi-Fi
When the mobile phone cannot connect to the main unit after resetting the password or
for other reasons, reset the Wi-Fi connection by following the actions in the app
download of this manual.

Factory reset

Press and hold the recharge button for 5 seconds for factory reset. The main unit needs
to reconnect to the app, and all related settings in the app will be cleared.
Firmware upgrade
The device's firmware can be upgraded through the app. During the upgrade process,
the main unit must be in the dust collection station or have a battery power more than
30%. It is not allowed to start cleaning during the upgrade process.
Caution
It is recommended to place the main unit in the charging position of the dust
•
collection station before starting cleaning.
Before using the product, arrange the desks, chairs, household items, floor
•
objects, etc. neatly, and clear power cords and small items laying on the ground
to avoid the product being blocked during cleaning.
Do not stand in front of the device while it is operating to avoid obstructing the
•
device from identifying the area to be cleaned.
It is recommended not to turn off the main unit after it has finished working, but
•
to keep it in the charging state for beer performance in the next cleaning.
13