Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Edge cleaning
Select Edge Cleaning in the app, and the main unit will automatically recognise the
cleaning area and perform edge cleaning, and automatically return to the dust collection
station to recharge after the cleaning is finished.
Area cleaning
After setting the area cleaning in the app, the main unit will clean according to the
planned area and automatically return to the dust collection station to recharge after
the cleaning is finished.
Fixed-point cleaning
Select fixed-point cleaning in the app, then set the target point on the map. The main
unit will automatically plan the route to the target point and clean in a 2×2m square area
with the target point as the centre. The main unit will automatically return to the dust
collection station to recharge after the cleaning is finished.
Scheduled cleaning
Use the app to set the time of scheduled cleaning, and the main unit will automatically
start cleaning at the specified time and automatically return to the dust collection
station after the cleaning is finished.
If the Do-Not-Disturb Mode is enabled, the scheduled cleaning will not be executed
during the Do-Not-Disturb period.
Add water or clean the mop during operation
During the cleaning process, if you need to add water or clean the mop, pause the
device by pressing the power button, remove the two-in-one water tank and mopping
module, add water or clean the mop, and then install the two-in-one water tank and
mopping module. Finally, press the power button to continue working.
Sleep mode
If the main unit is not charging and there is no operation for more than 5 minutes, it will
automatically enter sleep mode. If it stays in sleep mode for more than 6 hours, it will
automatically turn off. To wake up the main unit, press any button or use the app.
Resume cleaning
During the cleaning process, if the battery is low, the main unit will automatically return
to the dust collection station to recharge. After recharging, the main unit will
automatically return to where it left off and continue the cleaning process. If you
manually stop cleaning, then move, or operate the main unit during the charging
process, the resume cleaning will be cancelled.
12
Werbung
