VANTRUE E1 Lite Benutzerhandbuch Seite 7

Installation
Memory Card Setup (Suggested: Vanture U3 high-speed microSD card).
Use an authentic Micro SD card ranging from 32 GB to 512 GB, with a U3 speed class or
higher. It's advisable to use the Vanture brand (though it's not included with the dash
cam). Ensure the dash cam is powered off before inserting the card, and follow the
directional icon for correct insertion. You'll hear a click when the card is seated properly,
signifying a correct installation. To remove it, turn off the camera and press the card
until it clicks once more.
Before using a new card, format it by pausing any ongoing recording using the
recording button, then accessing the system settings through the
Select 'format card'
"card error, please format" message upon card insertion, go directly to the menu to start
the formatting.
Reminders:
1. Format the memory card monthly for optimal dash cam performance.
2. Never insert or remove the memory card while recording to prevent loss of
footage.
3. Refrain from using defective or slow-speed cards as they can cause recording
interruptions or data loss.
4. Always check the emergency video folder for important files before formatting, to
avoid accidental deletion of critical recordings.
and confirm to initiate the formatting process. If you encounter a
7
menu button.