VANTRUE E1 Lite Benutzerhandbuch Seite 29

Note:
1. Video playback and downloads to the SD card through the app do not use
network data, ensuring that reviewing footage is not only convenient but also
economical.
2. GPS track data is available for viewing within the app only after the video file has
been downloaded and played back locally. Remember to disconnect the dash
cam's Wi-Fi connection to ensure the GPS map data displays correctly. If the dash
cam remains connected to Wi-Fi, the map data will not load and will show as
blank.
10. Firmware Updates
Your dash cam is equipped with an automatic firmware update feature. When a
firmware update file is placed on the Micro-SD card and detected by the system, the
update process will commence automatically. After the update is successfully applied,
the camera will perform a reboot. To ensure you have access to the latest firmware
improvements, you can always visit the official VANTRUE website at www.vantrue.net.
Additionally, we recommend registering your product on the VANTRUE website at
www.vantrue.net/register, which allows you to receive email notifications whenever a
new firmware update becomes available.
11. Operating Temperature Range
The dash cam is built to function within a specified temperature range, from -20 to 60°C.
Operating the camera outside of this temperature spectrum can lead to a decline in
performance or potentially cause damage to the unit.
To Prevent Damage:
In conditions of high heat, avoid placing the camera in direct sunlight, especially
•
when the vehicle is parked.
During severe cold spells, where temperatures drop to 20°C or below, it is
•
advisable to remove the camera from the windshield if it's not in use. Then, store
it in a more temperate location like the glove compartment to protect it from the
extreme cold.
29