Video Playback; Analogue Tv Menu System; Picture Menu - Tech Line TL-32LC840 Bedienungsanleitung

Pause (Yellow button) : Pause the slideshow.
Continue (Green button) : Continue with the
slideshow.
Previous/Next (Left/Right buttons) : Jump to previous
or next  le of slideshow.
Rotate (Up/Down buttons) : Rotate the picture using
up/down buttons.
EXIT : Back to  le list.
Shuf e (Red button) : Shows the  les randomly and
continuous in current folder and
highlighted icon. If during a slideshow the shuf e mode
is enabled, the next pictures will be choosen randomly
(If the loop function is not enabled, the slideshow will
stop at the end. If the loop function is enabled, after
the slideshow ends, it will start again and again).
Loop : Slideshow goes on continuously and
turns the highlighted icon.
Info : Activates the operations bar.

Video Playback

Play (Red button) : Starts the video playback.
Stop (Blue button) : Stops the video playback.
Pause (OK button) : Pause the video playback.
Rewind (Cursor Left) : Goes backward.
Forward (Cursor Right) : Goes forward.
Menu (Menu button) : Sets subtitle/Audio.
• You can set subtitles by using OK button before
starting the playback or by using MENU button
during the playback.
Press "EXIT" button to switch back to previous
menu.
Note: PIP/PAP mode is not available while in Media
Browser mode.

Analogue TV Menu System

Picture Menu

Mode
For your viewing requirements, you can set the related
mode option.
Press " " or " " button to select Mode . Press "
" or " " button to choose from one of these options:
Cinema , Dynamic and Natural .
Brightness/Contrast/Colour/Sharpness/
Hue
Press " " or " " button to select the desired option.
Press " " or " " button to set the level.
icon turns the
Note : Hue option can only be visible when the TV receives
an NTSC signal.
Colour Temp
Press " " or " " button to select Colour Temp . Press
" " or " " to choose from one of these options: Cool ,
icon
Normal and Warm .
Note :
• Setting Cool option gives white colours a slight blue
stress.
• Setting Warm option gives white colours a slight red
stress.
• For normal colours, select Normal option.
Noise Reduction
If the broadcast signal is weak and the picture is
noisy, use Noise Reduction setting to reduce the
noise amount.
Press " " or " " button to select Noise Reduction.
Press " " or " " to choose from one of these options:
Low , Medium , High or Off .
Game Mode (optional)
Select Game Mode by pressing " " or " " button.
Use " " or " " button to set Game Mode as On or
Off . When Game Mode is set to On, speci c game
mode settings, which are optimized for better video
quality, will be loaded.
Also; Picture Mode, Contrast, Brightness, Sharpness,
Colour and Colour Temp settings will be invisible and
disabled while Game Mode is on.
Note :
Picture mode selection button on the remote control will have
no function while Game Mode is on.
Picture Zoom
Select Picture Zoom by pressing " " or " " button.
Use " " or " " buttons, to change picture zoom to
Auto , 16:9 , 4:3 , Panoramic , 14:9 , Cinema , Subtitle
or Zoom .
Store
Press " " or " " button to select Store. Press " "
or OK button to store the settings. " Stored... " will be
displayed on the screen.
English - 55 -