HomeMatic HM-Sec-Sir-WM Installationanleitung Und Bedienungsanleitung Seite 36

Start-up
During teach-in, please make sure you maintain a
distance of at least 50 cm between the devices.
First, select the suitable channel for the device you want to
teach-in and activate the teach-in mode afterwards:
• Shortly press the teach-in button (E) of the siren accord-
ing to the corresponding channel number (pressing it
once for channel 1, twice for channel 2, etc.). The signal
lamp on the front side indicates the selected channel
showing a flashing signal according to the selected chan-
nel number.
Press and hold the teach-in button (E) on the siren for at
•
least four seconds. The signal lamp (C) starts to slowly
flash red.
• Now put the device that you want to connect to the siren
into teach-in mode. For further information, please refer
to the user manual of the corresponding device.
• If teaching-in was successful, the signal lamp will stop
flashing.
36
4 s