Seat Adjustments - Gmini Grand Anleitung

WARNING: The seat can be placed on the chassis only so that the child is seated in the driving direction.
If you want to remove the seat, press two fuses located on both of the sides of the joint at the bottom of the
seat and pull the seat up. These actions do not make when a baby is in the seat.
WARNING: Do not remove the seat from the stroller when the child is inside of it.
CANOPY
Fig 7
Oversize zippered canopy extension offers full coverage keeping your child protected.
To remove the canopy, open the zip of the canopy's fabric part completely and press the buttons located
inside the canopy's joints then pull the canopy upward.
y To adjust the canopy, pull and/or push it centrally, Fig 7.1.
REMOVABLE BUMPER BAR
Fig 8
ls
WARNING: Always fasten the safety belts. The bar IS NOT a device to retain the child.
WARNING: The bar must not be used to lift the product with the child inside of it.
To
n

SEAT ADJUSTMENTS

9. Once the seat is assembled on the frame, it can be adjusted in three different positions.
The seat can be adjusted by pressing the button in the rear part of the seat, see Fig 9.
15-0658_Navod_Gmini_Grand.indd 23
15-0229_Navod_Gmini_Grand.indd 23
Fig 7.1
8. The stroller is equipped with removable bumper bar.
To fix the bumper bar, insert it into holes on the construction, as shown in
Fig 8, you should here the click.
To remove it, press the buttons located inside on the both sides of the
bumper bar.
To position and remove the child, unhook the bar from one side only.
Fig 9
7. A canopy can be installed on the stroller.
The seat features two joints positioned on the sides of the
backrest that allow the securing of the canopy.
To secure the canopy, introduce the fastening system into
the joints as shown in Fig 7.
Then, secure the fabric part to the canopy using the zip
located on the seat frame, around the backrest.
WARNING: The canopy must be anchored to both sides
of the stroller. Make sure it is secured properly.
3.7.2015 10:26:49
12.3.2015 11:00:23