Operating With A Somfy Sun Sensor - Somfy Altus 40 Rts Anleitung

ALTUS 40 RTS
3.7.5. Modifying the wheel rotation direction
1) Move the motorised product away from the end limits.
2) Press the UP and DOWN buttons simultaneously, until
the motorised product moves up and down.
3) Press the UP, my and DOWN buttons simultaneously,
until the motorised product moves up and down, to
reverse the wheel rotation direction.
3.7.6. Scroll wheel increment setting
1) Press the UP, MY and DOWN buttons simultaneously
until the motorised product moves up and down twice.
2) Use the UP and DOWN buttons to readjust the scroll
wheel movement. The result can be test in live with the
scroll wheel.
3) To confirm the new setting, press the MY button until the
motorised product moves up and down.

3.8. OPERATING WITH A SOMFY SUN SENSOR

For this function, a Telis Soliris control point is required.
3.8.1. Sun function activating
By default, the Sun function is not active.
1) To activate the Sun function, press the SELECT button
on the Telis Soliris control point until the motorised
product moves up and down.
2) To deactivate the Sun function, press the SELECT button
on the Telis Soliris control point until the motorised
product moves up and down.
When the intensity of the daylight exceeds the threshold set
by the Soliris sensor RTS, an order is sent to the motorised
product a er 2 min. The motorised product goes to the
MY position or to its down limit if no MY position has been
memorised.
When the intensity of the daylight falls below the threshold
set by the Soliris sensor RTS, the motorised product goes
to the sun disappearing position or stays at its position (my
or Down limit) if no sun disappearing position has been
memorised.
To set the sun disappearing position, see chapter 3.8.2.
©
Copyright 2021 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
1)
2)
1)
X 2
2)
1)
2)
EN
3) )
3)
OK
11