Up, Down, My: In Tilting Mode; Additional Settings - Somfy Altus 40 Rts Anleitung

EN

3.6. UP, DOWN, MY: IN TILTING MODE

1) To move the motorised product from a limit to the other
limit, briefly press (less than 0,5s) the UP or DOWN
button.
2) To stop the motorised product, press the my button.
3) If a favourite position (my) is recorded,To move the
motorised product to this favourite position (my), press
briefly the my button. The motorised product first goes
to the down end limit, then to the favourite position (my).
4) To tilt the slats, press and hold the UP or DOWN button
or use the scroll of the remote control, until the slats
reach the desired position.

3.7. ADDITIONAL SETTINGS

3.7.1. Record or Modify the favourite position (my)
1) Place the motorised product in the desired favourite
position (my).
2) Press the my button until the motorised product moves
up and down: the desired favourite position (my) has
been programmed.
3.7.2. Deleting the favourite position (my)
To delete the favourite position (my), press the my button
to move to this position and press the my button until the
motorised product moves up and down.
3.7.3. Adding/Deleting Somfy control points and sensors
Refer to the corresponding guide.
3.7.4. Modifying the motor rotation direction
1) Move the motorised product away from the end limits.
2) Press the UP and DOWN buttons simultaneously until
the motorised product moves up and down.
3) Press the my button until the motorised product moves
up and down to reverse the rotation direction.
4) Press the UP button to check the new rotation direction.
The motor rotation direction is reversed.
10
©
Copyright 2021 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
1)
2)
3)
4)
1)
2)
1)
2) 3)
4)
ALTUS 40 RTS