ESX VISION ANDROID-Serie Installationsanleitung Seite 10

INSTALLATION TIPS
USB port 1 and 4G/LTE dongle
Then open the storage compartment above
the glove compartment and loosen the
screws on the inner tray.
Drill a sufficiently large hole (approx. 19 mm
diameter recommended) in the left side wall
of the tray.
USB port 2
The small cover below the radio slot is suit-
able for installing the USB port 2.
10
Remove the inner tray of the storage com-
partment.
Now route the connector through the drilled
opening. Then put the tub back in the stor-
age compartment and fasten it.
Drill a sufficiently large hole (Ø 19 mm rec-
ommended) in the cover to install the USB
port 2.