RECA dimos UNI-RT 12 Bedienungsanleitung Seite 13

Page 12 of 32 of European Technical Assessment no. 23/0482, issued on 2023-09-05
Steel parts in respect of installation and application conditions:
The intended use regarding environmental conditions of anchors with components made of
stainless steel, results from their corrosion resistance class according (CRC) in accordance with
EN 1993-1-4:2006+A1:2015, Table A.3 in connection with EN 1993-1-4:2006+A1:2015,
Table A.2 and A.1.
• The fastener consisting of exterior and interior parts made of stainless-steel class A4 in
accordance with Annex A5, table A5.1: CRC III.
• The fastener consisting of exterior parts made of stainless-steel class A4 in accordance with
Annex A5, table A5.1 and interior parts made of galvanized carbon steel in accordance with
Annex A5, table A5.1: CRC III, provided that the anchor and sealing ring is installed in
accordance with Annex A4 and with displacement less than 1.0 mm under tension loads and
less than 3.0 mm under shear loads, and with a render with a maximum grain size K3.
• Furthermore, it is required that the ETICS or insulation is designed to avoid accumulation of
humidity. The fastener consisting of exterior parts made of stainless-steel class A4 according to
Annex A5, table A5.1 and interior parts made of galvanized carbon steel in accordance with
Annex A5, table A5.1: CRC III, provided that other suitable sealing measures are taken, such
as a hybrid joint compound or e.g., a sheet metal cover is applied.
Use conditions in respect of installation and use
Masonry and aerated autoclaved concrete base material - if not restricted by
the injection mortar ETA:
• Category d/d: Installation and use in dry masonry
• Category w/w: Installation and use in wet or dry masonry (incl. w/d installation in wet
masonry and use in dry masonry)
Concrete base material - if not restricted by the injection mortar ETA:
• I1: installation in dry or wet (water saturated) concrete and use in dry or wet concrete
• I2: installation in water-filled drill holes (not sea water) and use in dry or wet concrete
• D3: downward and horizontal and upwards (e.g. overhead) installation
RECA dimos anchor UNI-RT 12, RECA dimos anchor UNI-RT 16
Product description
Specification of intended use
Annex B2