Bosch KGN Serie Gebrauchsanleitung Seite 17

İnstallation
Install the appliance in a dry, well ventilat-
ed room. The installation location should
neither be exposed to direct sunlight
nor near a heat source, e.g. a cooker,
radiator, etc. If installation next to a heat
source is unavoidable, use a suitable
insulating plate or observe the following
minimum distances to a heat source:
3 cm to an electric cooker.
30 cm to an oil or solid-fuel cooker.
Appliances with fitted handles must be
situated at least 55 mm from the wall on
the hinge side so that the door can be
opened by 90".
the refrigerator is to be pushed, the‫‏‬ ‫וז‬
height-adjustable feet at the front of the‫‏‬
appliance must be completely screwed‫‏‬
in so that the front wheels can roll. Fig. El
Aligning the appliance
Fig. El
Place the appliance in the designated
location and align.
Adjust the height-adjustable feet with
a wrench.
Changing over the door
hinges
We recommend that you have the door
hinges changed over by our customer
service.
Before you start the conversion work,
pull out the mains plug or remove the
fuse.
Attention! Carefully place the
appliance on its back.
Installation in numerical sequence.
Fig.