Werbung
EN
2: To rewind the power cable, press the button
with one hand and guide the cable with the other hand
to ensure that it does not whip causing damage.
Emptying dust container
Empty the dust container at the latest when the sucked in
quantity of dirt in the dust container has reached the "MAX"
mark or the suction power has dropped.
1. Switch off the vacuum cleaner and disconnect the plug
from the mains. To do this always pull on the plug and
not on the cable.
2. Release the dust container by pressing the release
button.
3. Lift the dust container out of the vacuum cleaner.
4.when emptying the dust container, hold it low over a dustbin.
5. Pull the lock on the cover of dust container. Open the dust
container cover and empty the dust into the dustbin.
6. close the dust container cover.
7 place the dust container onto the cylinder vacuum cleaner.
8 check whether the dust container is securely seated.
12
Werbung
