Herunterladen Diese Seite drucken

Setting Up The Loudspeakers; Starting Up; Remote Control Battery Installation - AEG DVD 4619 HC Bedienungsanleitung

Dvd-anlage mit cd/mp3/usb/cr

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

English
46

Setting up the Loudspeakers

Remote control
battery installation
05-DVD 4619 HC_GB.indd 46
05-DVD 4619 HC_GB.indd 46
NOTE:
Do not insert the plug of the DVD player into the socket until all lou-
dspeakers and connections have been correctly made!
1. Remove approximately 1,5 cm of the cable insulation.
2. Turn over the cable end.
3. Open the cable clamp by pressing the lug.
4. Now connect the loudspeaker cable supplied to the loudspeaker.
Ensure the correct polarity (connect black to black and red to red).
5. Now connect the other end of the cable accordingly to the SPEAKERS
OUTPUT of the DVD player.
NOTE:
Please ensure that exposed wires do not touch or cross each other.
Danger of short-circuiting!

Starting up

WARNING:
Leaking out battery acid can damage your health. Remove the battery
from the battery compartment as soon as it is exhausted or if the remo-
te control is not going to be used for a longer period of time. Wipe up
leaked out battery acid with a cloth. In case of skin contact immediately
wash the aff ected area. Seek medical advice if battery acid has been
swallowed.In case of contact with your eyes wash out the eyes and seek
medical advice.
ATTENTION:
Mismatching battery types or new and used batteries must never be
used together. Diff erent battery types have diff erent properties. Do not
use old and new batteries together. The mutual use of old and new
batteries can shorten the lifetime of the new batteries and possibly
result in leakage of the old batteries. When disposing of old batteries
you should strictly comply with the legal and environmental regulations
applicable in your country. Do not throw batteries into fi re!
NOTE:
The lifetime of the enclosed batteries may be shortened because of
storage.
1. Open and remove the battery compartment cover.
2. Insert two batteries of type AAA/R03 (1.5 V), ensure correct polarity
(+ and -). Start with the negative pole (-).
3. Attach and close the battery compartment cover.
28.05.2009 8:08:56 Uhr
28.05.2009 8:08:56 Uhr

Quicklinks ausblenden:

Werbung

Kapitel

loading