Aux In (R/L) Input Sockets; Troubleshooting - AEG DVD 4619 HC Bedienungsanleitung

Troubleshooting

Before sending the machine to the Customer Services, use the following table to check whether you can rectify the fault
yourself.
Fault
The power supply light
does not light
No image displayed on
screen
No response when pres-
sing button
05-DVD 4619 HC_GB.indd 67 05-DVD 4619 HC_GB.indd 67

AUX IN (R/L) Input Sockets

To connect analogue replay devices. With these sockets you can also hear
the sound from other playback devices such MP3 players, CD players etc
through the loudspeakers.
1. Please connect the external device with an appropriate cinch cable
(2x RCA) to the AUX IN sockets (Fig. 2/17).
2. Press the INPUT button (Fig. 3/22) repeatedly until "AUX" appears in
the display.
3. For the remaining procedure please see the operating instructions of
the external sound source.
4. Through the loudspeakers you now hear the sound from the external
device; with the VOL+/- buttons (Fig. 3/18, 19) you can change the
volume.
NOTE:
Adjust the volume of the external device to a comfortable level.
Possible cause
No power supply
no power supply/ mains switch
switched off
Video cable not correctly
connected
no DVD/CD inserted
DVD/CD not compatible
DVD/CD incorrectly placed in
CD/DVD-tray
CD/DVD is dirty
CD/DVD is damaged
Incorrect settings
The child lock system is acti-
vated
The wrong TV mode has been
selected.
Power supply problem or static
charging of appliance
Solution
WARNING: Before troubleshooting, switch the
player off .
Put the mains plug in correctly, if necessary, check the
socket is working with another appliance.
Switch the player on by the mains switch (Fig. 2/29).
WARNING: Before troubleshooting, switch the
player off .
Check the correct fi t of the Video cable ➯ "Connecting
the Video cable". Make sure that the jacks are tightly in
the sockets.
Insert a CD/DVD.
Use only compatible media (see ➯ "Technical data").
Turn the CD/DVD around.
Clean the CD/DVD.
Use a diff erent CD/DVD.
Check the settings of your DVD-Player.
Deactivate the child lock ➯ "Parental".
Press the TV-Mode button (Fig. 3/26) to change the TV
mode.
Switch off the main switch and pull out the mains plug.
Insert the mains plug into the socket and switch the
player on again.
English
67
28.05.2009 8:09:01 Uhr 28.05.2009 8:09:01 Uhr