Changing The Viewing Angle; Adjusting The Volume - AEG DVD 4619 HC Bedienungsanleitung

Changing the viewing angle

Adjusting the volume

Creating a playlist (CD/DVD)
CD:
DVD:
Deleting a playlist (CD/DVD)
05-DVD 4619 HC_GB.indd 55 05-DVD 4619 HC_GB.indd 55
Some DVDs off er the possibility to select the viewing angle.
Press the ANGLE-button (Fig. 3/29) to change the viewing angle.
NOTE:
If changing the Viewing Angle is not possible, the message " " will
be displayed.
Repeat pressing the the button to choose a diff erent viewing angle, or to
return to the original viewing angle.
Press the VOL + button (Fig. 3/18) to increase the volume.
Press the VOL - button (Fig. 3/19) to reduce the volume.
NOTE:
Please remember, that this will only change the output volume of the
DVD-Player. In order to adjust the volume to your requirements you
may also have to change the volume of the playback device.
You may want to replay the titles, e.g. on a CD, in a diff erent order to the
order determined by the producer. The function "Create Playlist" you can
create your own playing order.
To do this, proceed as follows:
1. Press the PROG-button (Fig. 3/39). A table is displayed. Here you can
enter the desired order of the tracks (in the case of CDs) or chapters/
titles (for DVDs).
NOTE:
However, your playlist will be lost when switching off the DVD-
Players or when inserting a new CD/DVD.
2. Use the Cursor Buttons (Fig. 3/28) to navigate in the table.
3. Enter the desired track (in the case of CDs) or the desired title and
chapter (for DVDs) at the appropriate position in the table. Use the
Numerical Buttons (Fig. 3/2) for this purpose.
4. Use the Cursor Buttons (Fig. 3/28) to select the command "Start" at
the bottom of the screen to save the input.
5. Press the ENTER-button (Fig. 3/13) on the remote control to confi rm
this command.
1. Press the PROG-button. You will now see a table (Fig. CD or Fig. DVD).
2. Use the Cursor Buttons (Fig. 3/28) to manoeuvre to the command
"Stop" at the bottom of the table.
3. Press the ENTER-button (Fig. 3/13) on the remote control to confi rm
this command.
4. Press the PROG button to terminate this procedure.
English
55
28.05.2009 8:08:58 Uhr 28.05.2009 8:08:58 Uhr