Volvo Wallbox selected Installationsanleitung Seite 47

2. Confirm at the bottom right of the Enable
charging according to German cali-
bration law page.
3. The Enable charging according to Ger-
man calibration law screen is displayed;
confirm by selecting Enable.
Note
Note that no other charging approval pro-
cedure can be selected (e.g. Free-Char-
ging). Not even after a reset to factory
settings.
8.4 Identifying and fixing errors
There are two ways to determine that there is an
error:
n Directly on the Wallbox via the operating /
error condition LED (4) (see figure 22)
n Via the error list in the web app
Error categories
The following error categories are displayed on
the Wallbox via the operating / error condition
LED (4), see figure 22:
Error category Colour Repair priority
Fatal error Red 1
Critical error Yellow 2
Non-critical error Blue 3
No error White -
If there is at least one error, the operating / error
condition LED lights up in the colour cor-
responding to the error category.
45
If there are multiple errors, the operating / error
condition LED lights up in the colour assigned to
the highest error category.
Error list
The error list provides the following information
for each error (for details, see operating instruc-
tions):
n To display the error list, select Wallbox set-
tings, Error list in the web app navigation.
The error list provides the following infor-
mation for each error:
Cause of error
l
Corrective actions
l
Additional information: such as sta-
l
tus, category, time (date and time) at
which the error occurred.
Note
There may be multiple entries in the error list that
have the same cause (error cascade).
Error status
The following error statuses are defined:
Error Meaning
status
Active The error is active and the cause of the
status error has not yet been fixed.
Passive The cause of the error has been fixed
status or the error is no longer present.
8 Commissioning
8.4.1 Fixing errors
ATTENTION
Damage to equipment when fixing errors
If an error is not fixed despite correctly following
the instructions for fixing errors, the Wallbox is
defective.
n Do not use the Wallbox.
n Notify technical service.
1. To fix an error, select Wallbox settings,
Error list in the web app navigation.
The error list is displayed, see
and fixing errors.
2. Select an error in the list.
Alternatively, detailed information about the
error identified can be found in the operating
instructions.
3. Read the detailed description carefully and
then analyse and fix the error by following
the instructions in the error list.
Note on fatal errors
To fix errors in this category, the Wallbox
generally has to be restarted.
If the errors can be fixed while operation is
in progress, these errors are still displayed
as Active after the cause has been fixed
until the next time the Wallbox is restarted.
Note on critical and non-critical errors
Once the cause of the error has been fixed,
the status of the error immediately changes
to Passive.
4. If multiple errors are displayed, fix the
errors in order of priority, starting with fatal
errors, followed by critical errors and so on.
Identifying