Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PROGRAMMING THE MOBILE PHONE NUMBER TO BE CONTACTED
The addressee for the alarm messages is programmed by sending SMS messages from a standard mobile phone, to the phone
number of the SIM card inserted in the GSM Modem.
The phone number to be contacted shall be entered with + followed by the international code (for example, +39 for Italy).
8.
Send the following message to the inserted SIM phone number
Telphone number 1:
Telphone number 2:
Telphone number 3:
The GSM Modem will be ready to operate at best only once registered with the GSM network and when GSM signal quality is
good.
IMPORTANT NOTE
When installing a prepaid SIM card, never let balance credit get to zero and "recharge" your account balance credit in time
or the GSM Modem will not work.
#1#+39number#
#1##
#1#1#
#4#+39number#
#4#+39number#4
#4##
#4#4#
#5#+39number#
#5#+39number#5
#5##
#5#5#
Sim card
:
send SMS
cancel number
display the number set-in
send SMS
programme call only
cancel number
display the number set-in
send SMS
programme call only
cancel number
display the number set-in
EN
42
Werbung
