Werbung
Verfügbare Sprachen
Verfügbare Sprachen
END OF WORK
When machine gets to end of work, the gearbox is automatically set in neutral and limit microswitch is pressed. The
LCD will then display:
A.
Final pause in minutes, is enabled.
B.
Wait speed 0: the control unit opens turbine by-pass
or closes oil diverter valve
(only for machines with motor-driven hose winding).
C.
Wait closing 2: the outlet valve opens or the closing valve
closes, if fitted.
D.
The LCD will display the symbol
Press
and Stop is displayed,
the machine is now ready for a new working cycle.
NOTE: To start a new working cycle after positioning the machine and laying down the hose, simply push Start.
EN
37
Werbung
