Switch-On; Using The Programming Keys - Ocmis Irrigazione RAIN CONTROL 4 Bedienungs- Und Wartungshinweise

SWITCH-ON: press the ON/OFF key to switch equipment on,
XXX
the LCD displays the OCMIS - RAIN CONTROL 4 logo for a
few seconds.
The number to the right of the logo indicates the version of
software used.
4
PRESS INC
Press this key to open valve and display Stop Status.
OPEN VALVE
PAGE: STOP STATUS

USING THE PROGRAMMING KEYS

The PROG key is used to enter the programming pages and confirm the settings.
+ and - keys are used to increase and decrease the flashing figures.
EN
26