Nilfisk SW 850S P Betriebsanleitung Seite 46

SPARE PARTS AND MAINTENANCE
All necessary operating, maintenance and repair procedures must be carried out by qualifi ed personnel or by Nilfi sk-Advance
Service Centers. Only original spare parts and accessories must be used.
Contact Nilfi sk-Advance for service or to order spare parts and accessories, specifying the machine model and serial number.
CHANGES AND IMPROVEMENTS
Nilfi sk-Advance constantly improves its products and reserves the right to make changes and improvements at its discretion without
being obliged to apply such benefi ts to the machines that were previously sold.
Any change and/or addition of accessories must be approved and performed by Nilfi sk-Advance.
OPERATION CAPABILITIES
This sweeper has been designed and built to clean/sweep smooth and solid fl oors, and to collect dust and light debris, in civil and
industrial environments, under safe operation conditions by a qualifi ed operator.
CONVENTIONS
Forward, backward, front, rear, left or right are intended with reference to the operator's position, that is to say with the hands on the
handlebar (3).
UNPACKING/DELIVERY
To unpack the machine carefully follow the instructions on the packing.
Upon delivery check that the packing and the machine were not damaged during transportation. In case of visible damages, keep
the packing and have it checked by the carrier that delivered it. Call the carrier immediately to fi ll in a damage claim.
Check that the machine is equipped with the following features:
– Sweeper User Manual
– Petrol Engine Manual
– Sweeper Spare Parts List
SAFETY
The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary
precautions to safeguard people and property.
The operator's cooperation is essential in order to prevent injury. No accident prevention program is effective without the total
cooperation of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while working
or moving around, are caused by failure to comply with the simplest rules for exercising prudence. A careful and prudent operator is
the best guarantee against accidents and is essential for successful completion of any prevention program.
SYMBOLS
DANGER!
It indicates a dangerous situation with risk of death for the operator.
WARNING!
It indicates a potential risk of injury for people or damage to objects.
CAUTION!
It indicates a caution or a remark related to important or useful functions. Pay careful attention to the
paragraphs marked by this symbol.
NOTE
It indicates a remark related to important or useful functions.
CONSULTATION
It indicates the necessity to refer to the User Manual before performing any procedure.
SW 850S P 146 0790 000(4)2007-03 A
USER MANUAL ENGLISH
3