HP LaserJet MFP Betreiberhandbuch Seite 59

Warning messages
The following warning messages might appear when you use the
HP MFP Send Fax driver.
PC fax feature may be disabled at the MFP
warning
The PC fax feature may be disabled at the MFP warning appears if
the driver port has been changed.
To update the configuration settings, use the following steps:
1
2
3
4
5
6
ENWW
In the MFP Send Fax Warning message box, click OK.
Verify that the MFP firmware has been updated to the most
current version available. See "Determining if the MFP Send Fax
driver is supported by the MFP" on page 3.
Verify that the PC FAX SEND feature is enabled on the MFP. See
"Uninstalling the HP MFP Send Fax driver" on page 16.
Click Start, click Settings, and then click Printers and Faxes.
Under Printer Tasks on the Printers and Faxes window,
right-click on the name of the MFP and then click Properties.
In the HP MFP Send Fax Properties dialog box, click Device
Settings.
Warning messages 51