HP LaserJet MFP Betreiberhandbuch Seite 57

The default fields do not refresh
The information in the sender information fields on the Setup tab is
updated the first time that the sender information is entered in the
sender information fields in the Default Settings dialog box. If the
default sender information is changed later, the sender information
fields on the Setup tab are not refreshed. The changes are saved, but
the information does not appear in the dialog box. To show the new
information, exit from the MFP Send Fax driver and then restart the
driver.
Changed settings do not take effect
The MFP Send Fax driver captures fax configuration information
during installation. If settings are changed after the driver is installed,
complete a manual update by using the Update Now feature to
synchronize the driver with the MFP settings.
To synchronize the driver with the MFP settings using Update Now,
use the following steps:
1
2
3
ENWW
Click Start, click Settings, and then click Printers and Faxes.
Under Printer Tasks in the Printers and Faxes window,
right-click the name of the MFP and then click Properties.
In the HP MFP Send Fax Properties dialog box, click Device
Settings.
Functional errors 49