HP LaserJet MFP Betreiberhandbuch Seite 50

5
6
7
If the billing code feature is enabled on the MFP, a billing code entry is
Note
required for walk-up fax jobs sent from the MFP.
8
9
10 In the HP MFP Send Fax Properties dialog box, click Device
11 In the Automatic Configuration: drop-down menu, select
Update Now stays selected in the Automatic Configuration
Note
drop-down menu briefly. If you wait a few seconds or return to this dialog
box later, Off will be selected in the drop-down menu.
12 Click OK.
42 Chapter 3 Configuration
Touch CUSTOM to open the billing code screen.
Use the up and down arrows to select the minimum number of
digits in the billing code.
Touch OK to enable the billing code feature or touch OFF to
disable the billing code feature.
Click Start, click Settings, and then click Printers and Faxes.
Under Printer Tasks on the Printers and Faxes window,
right-click the name of the MFP and then click Properties.
Settings.
Update Now.
ENWW