Push one of the front brackets on
4.
the fruit and vegetable container
covers slightly outwards , then
unclip one side of the fruit and ve-
getable container covers at the
front followed by the other side .
→ Fig.
10
Push one of the rear brackets on
5.
the fruit and vegetable container
covers slightly outwards , then
unclip one side of the fruit and ve-
getable container covers out at the
front followed by the other side .
Remove the fruit and vegetable
container covers .
→ Fig.
11
Lift the shelf slightly above the fruit
6.
and vegetable container
pull it out until the front edge of the
refrigerator compartment
→ Fig.
12
Lift the shelf above the fruit and ve-
7.
getable container at the front
and pull it out .
→ Fig.
13
Fitting the shelf above the fruit and
vegetable container
Insert the storage containers and
1.
the fruit and vegetable containers.
→ Fig.
14
Set the humidity controllers for the
2.
fruit and vegetable container to a
high humidity setting
Hook in the fruit and vegetable
3.
container covers at the rear on one
side first , then press the rear
bracket on the other side slightly
outwards
and snap the fruit and
vegetable container covers in at
the rear .
→ Fig.
15
4.
5.
and
.
.
Cleaning and servicing en
Hook in the fruit and vegetable
container covers at the front on
one side , then press the front
bracket on the other side slightly
outwards
and snap the fruit and
vegetable containers cover in at
the front .
→ Fig.
16
Insert the storage containers and
the fruit and vegetable containers.
→ Fig.
17
59