Werbung
Verfügbare Sprachen
Verfügbare Sprachen
en Cleaning and servicing
Clean the appliance, the fittings,
2.
the accessories and the door seals
with a dish cloth, lukewarm water
and a little pH-neutral washing-up
liquid.
Dry thoroughly with a soft, dry
3.
cloth.
Insert the fittings and install the ap-
4.
pliance components.
Electrically connect the appliance.
5.
→ Page 46
Putting the food into the appliance.
6.
14.3 Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
Lift the shelf at the front , pull it
▶
out and remove it .
→ Fig.
4
Removing door rack
Lift the door rack and remove it.
▶
→ Fig.
5
Removing the storage container
Pull out the storage container as
1.
far as it will go.
Lift the storage container at the
2.
front
and remove it
→ Fig.
6
Removing the fruit and vegetable
container
Pull out the fruit and vegetable
1.
containers as far as they will go.
Lift the fruit and vegetable contain-
2.
ers at the front
them
.
→ Fig.
7
58
.
and remove
Removing the frozen food
container
Take out the frozen food container
1.
as far as it will go.
Lift the frozen food container at the
2.
front
and remove it
→ Fig.
8
Removing the front of the
container
You can remove the front of the fruit
and vegetable container and frozen
food container to facilitate cleaning.
Press in the snap-in hooks on the
▶
side of the container
move the front from the container
in a turning motion
→ Fig.
9
14.4 Removing appliance
components
If you want to clean your appliance
thoroughly, you can remove certain
components from your appliance.
Shelf above the fruit and
vegetable container
You can remove the cover of the fruit
and vegetable container in order to
clean it thoroughly.
Removing the shelf above the fruit
and vegetable container
Remove the fruit and vegetable
1.
containers. → Page 58
Remove the storage container.
2.
→ Page 58
Set the humidity controllers for the
3.
fruit and vegetable container to a
high humidity setting
.
and re-
.
.
Werbung
