Sharp VC-2300G Serviceanleitung Seite 6

1. Mode control function
Pressing one or more of the nine control buttons at
the front of the VC-2300 activates this function to
set the machine to a corresponding mode.
(Control buttons)
eat PAUSE/STILL EJECT
[Mode selection]
The following 12 modes can be chosen through a single button operation or combined button operations.
Button Operation
Figure 5.
Machine State
No action
Recording
(Video search)
—}—
Playback
Allowing later recording
of sounds only
Pressing ;AUDIO DUB| once activates the AUDIO
DUB mode, and pressing this same button once
more cancels this mode.
Fast forwarding
+
Rewinding
PAUSE/STILL
Temporary stop of tape tra-
vel; stand-by state.
}
PAUSE/
PLAY} + | stitL
Playback of a still picture
Capstan motor alone is
at astop in PLAY mode
ca
AUDIO + +
ae
PAUSE/
STILL
Playback of a still picture
with audio dubbing tem-
porarily stopped (Audio
dubbing stand-by)
Capstan motor alone is at
a stop in AUDIO DUB
mode.
rec] [Sct
Temporary stop of record-
ing (Record stand-by)
|
rinch roller is free and
supply reel and take-up
reel brakes are on in REC
mode
Pressing once
put the machine in
PAUSE mode, and
pressing this same but-
ton again cancels this
mode.
VIDEO
SEARCH
Pea [a]
Fast playback
VS. is kept depressed.
VIDEO SEARCH|mode continues as long as
EJECT
Cassette compartment open