Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DMX channels
With this function, you can display the number of the DMX channels.
Mic sensitivity
With this function, you can select the desired microphone sensitivity between 0 % and 100 %.
Invert PAN
With this function, you can reverse the PAN-movement.
Invert TILT
With this function, you can reverse the TILT-movement.
PAN-TILT Swap
With this function, you can swap PAN and TILT.
PAN-TILT Encoder / automatic PAN/TILT correction (Feedback)
With this function, you can correct the PAN/TILT movement to the programmed position.
DMX signal / action if no DMX
With this function, you can "keep" or "clear" the DMX value if there is no DMX-signal.
Display power save / display turn off
With this function, you can adjust the display characteristics when the buttons are inactive:
ON - Shuts off the display after 30 seconds
OFF - Display always on.
Linear color / switch color change from step to linear color
With this function, you can select the linear change of the color wheel.
Load default
With this function, you can restore the factory settings of the device. All settings will be set back to the
default values (shaded).
Test
Test function of each channel
With this function you can test each channel on its (correct) function.
Advance
Display reverse
With this function, you can flip the display by 180° for a better view when the fixture is hung from the truss or
a ceiling.
Time reset / clear total hours
With this function, you can reset the running time (total hours) of the device.
Top temperature/ LED off at temperature
With this function you can set the inside temperature at which the device will automatically switch the LED
off. Inside temperatures below 80° C are not critical. 80° C and more should lead to the LED being switched
off. Please note that the outside temperature should not exceed 45° C.
27/32
00133827, Version 1.2
Werbung
