EuroLite LED TMH-B90 Bedienungsanleitung Seite 26

Control Board
The Control Board offers several features: you can easily set the starting address or run the pre-
programmed program.
Press OK 2 x until the display is lit. Browse through the mode menu by pressing the arrow buttons (up and
down). Press OK 2 x in order to select the desired menu. Browse through the main menu by pressing the
arrow buttons up and down. Press OK to enter the respective menu item of the main menu. You can change
the selection by pressing the arrow buttons (left and right). Press OK in order to confirm. You can leave
every mode by pressing the arrow buttons (left and right). The functions provided are described in the
following sections.
Default settings shaded.
Mode menu Main menu
RunMode
Address
Channel
Sens
Invert - X
Setting
Invert - Y
Swap - XY
Encoder - XY
NoDMX
DisplaySave
LinearColor
LoadDefault
Test PAN ...
Offset
InvertDisplay
Advance TimeReset
TopTem
HardWare
Pan Hall Y
Ver
TotalHours
SysInfo
PartialHours
Temperature
Setting
Run Mode
DMX mode
This mode allows the unit to be controlled via any standard DMX controller.
Sound
With this function, you can run the internal program sound-controlled.
Random auto mode
With this function, you can run the random internal program.
Auto mode (Auto 1 - 4)
With this function, you can run 4 different internal programs.
Address
With this function, you can set the desired DMX address via the Control Board.
Sub menu
DMX/Sound/Random
/ Auto 1, Auto 2, Auto
3, Auto 4
001~ 512
14 CH
1 – 99, 80
ON/OFF
ON/OFF
ON/OFF
ON/OFF
Keep/clear
ON/OFF
ON/OFF
OK/Cancel
PAN = XXX ...
0 – 120, 80
26/32
Function
DMX mode / music control / random auto
program / auto program 1 - 4
DMX address setting
Number of DMX channels
Mic sensitivity
Reverse movement
PAN-TILT swap
Automatic PAN/TILT adjustment
Action if no DMX
Display turn off
Switch color change from step to linear color
Restore factory settings
Test function
Service function only
Password 123456
Display reverse 180 degrees
Clear fixture running time
Lamp off at temperature
Service function only
Software version
Fixture running time
Running time since last switch-on
Inside temperature
00133827, Version 1.2