Kärcher WD 4 Originalbetriebsanleitung Seite 8

Scope of delivery
The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
unpacking. If any accessories are missing or in the
event of any shipping damage, please notify your deal-
er.
Warranty
The warranty conditions issued by our sales company
responsible apply in all countries. We shall remedy pos-
sible malfunctions on your device within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)
Description of the device
The illustration of the description of the device show the
device with the best possible equipment (WD 4 P S /
KWD 4 P S).
Depending on the model selected, there are differences
in the equipment. The specific equipment is described
on the device packaging.
For the illustrations, refer to the graphics page.
Illustration A
Suction hose connection
1
Turn switch
2
Device socket
3
Blowing function
4
Carrying handle
5
Parking position handle / accessory holder
6
Storage area
7
Cable hook
8
Hose storage (both sides)
9
Container closure
10
Filter box with unlocking button
11
Rating plate with technical data (e.g. container size)
12
Mains connection with mains plug
13
Parking position for floor nozzle
14
Accessory storage
15
Steering roller
16
Filter bag
17
Flat pleated filter
18
Removable handle
19
Suction hose with connection piece
20
Suction tubes 2 x 0.5 m
21
Crevice nozzle
22
Floor nozzle
23
** Adapter for connecting power tools
24
** optional
8
Installing the steering rollers
1. Before initial startup, remove the contents from the
container and mount the steering rollers.
Illustration B
Illustration C
Illustration D
Note
For versions with stainless steel tubes, remove the pro-
tective cover before initial startup.
Inserting the filter bag
1. Fully unfold the filter bag.
2. Attach the filter bag to the device connection and
press it on firmly.
Illustration E
3. Fit and lock the device head.
Illustration F
Note
We recommend using a filter bag to vacuum fine dust.
Installing the hose, pipes, floor nozzle
1. Connect the suction hose.
Illustration G
2. Connect the suction hose to the handle.
Illustration H
Note
For convenient vacuuming in confined spaces, the han-
dle can be removed, and the accessories plugged di-
rectly onto the suction hose.
To release the handle, the grey areas on both sides of
the handle must be pressed, and the handle pulled from
the hose.
3. Install the floor nozzle.
 Install the insert in the floor nozzle.
 Connect the floor nozzle to the suction pipes.
Illustration I
Starting up the device
1. Plug the mains plug into the socket.
Illustration J
Devices without a socket
2. Set the trigger into the desired position.
Illustration K
 Position "1 ON": The suction / blower function is
activated.
 Position "0 OFF": The device is switched off.
Devices with a socket
3. Set the trigger into the desired position.
Illustration L
 Position "1 ON": The suction / blower function is
activated.
 Position
the suction is activated automatically.
 Position "0 OFF": The device is switched off.
Note
As long as the device is supplied with power, the device
socket can be used as a power source.
Note
Limited for Switzerland only: The socket outlet shall on-
ly be used during operation in dry condition.
English
Initial startup
: When the power tool is connected,