External Control (Dc Versions); Accessories; Maintenance, Service, Repairs; Decommissioning, Dismantling And Disposal - Pfannenberg Quadro LED-HI Betriebsanleitung

en
5.3

External control (DC versions)

S1 Operating
mode
No.
1 2 3
Standby for
1
OFF OFF OFF
external control
2 Flashing light 1 Hz
OFF OFF ON
3 Continuous light
OFF ON OFF
4 Blinking light 1 Hz
OFF ON ON
5 Flashing light 2 Hz
ON OFF OFF
6 Blinking light 2 Hz
ON OFF ON
7 Flashing light 0.1 Hz
ON ON OFF
8 Flashing light 0.5 Hz
ON ON ON
Switch position S1.4 for external control: ON
Example for control by C1

6. Accessories

Item No.
28112000003

7. Maintenance, service, repairs

➢ Observe the
Safety information
The device requires no special maintenance.
➢ Carry out external cleaning using a weak soap solution without using any solvents.
➢ Only replace components using original spare parts.
➢ Only have repairs carried out at the manufacturer's premises.
Conversions, modifications, improper and impermissible use as well as failure to observe the notes in these
operating instructions shall void any warranty.

8. Decommissioning, dismantling and disposal

➢ Observe the
Safety information
➢ Only properly qualified personnel should dispose of old devices in accordance with applicable environ-
mental regulations.
Old devices are also professionally disposed of by Pfannenberg. Delivery to one of our manufacturing fa-
cilities shall be free of charge.
Pfannenberg GmbH
Werner-Witt-Straße 1
D- 21035 Hamburg
Tel.: +49/ (0)40/ 734 12-0
Fax: +49/ (0)40/ 734 12-101
service@pfannenberg.com
http://www.pfannenberg.com
10/2020
Operating Instructions Quadro LED-HI
Switchover by
C1 to
operating mode No. ...
3
4
--
--
7
8
--
--
Designation
Housing connectors, for connecting several lights
during all work on the device.
during all work on the device.
Seite 1 / 6
Switchover by
C2 to
operating mode No. ...
2
--
4
--
6
--
8
--
Switchover by
C1 + C2
to operating mode
No. ...
4
4
4
--
8
8
8
--
086200011a