Widex REMOTE LINK Bedienungsanleitung Seite 94

INTENDED USE
The device is intended to connect Widex fitting software to your W-Link
hearing aid* for fitting purposes.
*hearing aid with wireless connectivity
SETTING UP AND USING THE DEVICE
Charging the device ‒ see illustration 2
Using the micro USB cable, connect the device to your computer or to a
USB adaptor connected to a power outlet.
We recommend using a 5V 500mA USB adaptor.
NOTE
Please charge the battery fully before using it the first time. While charging,
the center LED on the device will be flashing. When the device has been fully
charged, the center LED will stop flashing.
Turning the device on and off
To turn on the device, press and hold the push button for a few seconds
until the LEDs light up.
To turn off the device, press and hold the push button for a few seconds
until all the LEDs are off.
94