F astLock System: Two-piece litters have a rapid take-down
FastLock System comprised of (2) FastLock Couplers and a
two-part Interleave Plate.
To assemble 2-piece litters:
Pick up the litter and bend in the
middle, pulling toward you, until
the litter is at an approximately
30-degree angle (1). Insert the
tabs on the Interleave Plate
through each other (2).
Use slight pressure to lift one
section of the litter straight up,
while pushing down slightly on
the other section. This will engage
the tabs of the Interleave Plate (3).
Rotate the ends of the litter away
from you until the litter is relatively
flat and the FastLock Couplers
align (4).
5442.10/2022 REV1
1
3
ENGLISH
FASTLOCK COUPLERS
INTERLEAVE
PLATES
2
4
5