Introduction; Intended Use; Features; Package Contents - Parkside PMGS 12 C3 Originalbetriebsanleitung

MODELLING AND ENGRAVING
SET PMGS 12 C3

Introduction

Congratulations on the purchase of your new ap-
pliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This mini-drill is intended for drilling, milling, en-
graving, polishing, cleaning, grinding, cutting of
wood, metal, plastics, ceramics and stone in dry
rooms. Any other usage of or modification to the
appliance is deemed to be improper and carries
a significant risk of accidents. The manufacturer
accepts no responsibility for damage(s) attributable
to misuse. This appliance is not intended for com-
mercial use.

Features

Modelling and engraving set
ON/OFF switch/control dial
Plug connector for mains adapter
Metal clip
Grip ring
Tensioning nut
Grip ring with LED light
Spindle lock
Mains adapter (see fig. A):
Plugging device for plug connector
Cradle
Mains adapter
Power cable (with mains plug)
│
■ 16 GB
Accessories (See fig. B):
6 HSS drill bits
2 mandrels as tool holders
3 polishing discs
4 grinding discs
1 metal brush
16 cutting discs
5 collet chucks
2 synthetic brushes
3 milling bits
2 engraving bits
5 grinding bits
1 combination key
ON/OFF switch LED light

Package contents

1 modelling and engraving set
1 mains adapter
1 plastic case
1 accessories set (50 pieces)
1 LED ring incl. batteries
1 operating instructions

Technical details

Modelling and engraving set PMGS 12 C3:
Rated voltage:
Rated power consumption: 22 W
Rated rotational speed:
Rated capacity:
Drills:
Discs:
Mains adapter PMGS 12 C3-1:
INPUT:
Rated supply voltage:
OUTPUT:
Rated output voltage:
Rated output current:
Protection class:
Protection rating:
12 V (DC)
n 5000–20000 rpm
max. Ø 3.2 mm
max. Ø 25 mm
230 V ~ , 50 Hz
(alternating current)
12 V (DC)
1 A
II /
(double insulation)
IP20
PMGS 12 C3