Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembly
3. Preparing and fitting the display (Continued)
3. Fixing the display
Firmly tighten the screws (2) for securing unit
Ⓕ in the screw holes on the upper part of the
mounting bracket (2).
(Tightening torque: 1.2 to 1.5 N·m)
Important
Make sure to fit the screws for securing unit Ⓕ on the
left and right to prevent the display from coming off.
4. Fitting the earth brackets
Note
Fit the earth brackets to the mounting brackets (left
and right) in the same way.
1. Temporarily tighten the earth bracket
attachment screws Ⓖ (4 on each
mounting bracket) in the holes on the
side of the mounting brackets (two each
at top and bottom).
30
(Continued)
Holes for screws for securing unit
Screw for securing unit Ⓕ
Mounting bracket
Earth bracket
attachment screws Ⓖ
Earth bracket attachment screws Ⓖ
Werbung
