Panasonic TY-ST85PB1 Montageanweisungen Seite 28

Assembly
1. Assembling of the stand (Continued)
4. Set the display to the desired height by
selecting from the options (4).
From the table below, select the screw
holes for fixing the mounting brackets ③
to the fittings (top/bottom) ④.
Mark
(Distance from the floor surface)
A
B
C
D
5. Using the screw holes selected in step 4,
fix the mounting brackets ③ to the
fittings (top/bottom) ④ with the bracket
assembly screws Ⓑ (8) and insert nuts Ⓓ
(8).
(Tightening torque: 1.8 to 2.2 N·m)
6. Fix the shelf plate ⑤ (1) to the back of
the bottom fitting with the shelf plate
attachment screws Ⓔ (4). (It can be
attached to either the right or left side.)
(Tightening torque: 1.2 to 1.5 N·m)
28
(Continued)
Unit: mm
Center of screen
1197
1297
1397
1497
Mark
Mounting bracket ③
Mounting
bracket ③
Insert nut Ⓓ
Insert nut Ⓓ
Cutout
Mark
Bracket assembly
screw Ⓑ
Bracket assembly
screw Ⓑ
Mounting
bracket ③
Tab
Shelf plate ⑤
Shelf plate
attachment
screw Ⓔ