Peiying PY-9348 Bedienungsanleitung Seite 9

Owner's manual
SELECTING TRACKS/ FW. / RW
Press ( 7) to choose your favorite track upward or downward respectively. Press and hold( 7)
button to fast forward or rewind the track upward or downward respectively.
PLAYING AUDIO/VIDEO FILE REPEATLY
Press "RPT/3"button to perform repeat playing.when you need to repeat playing the track you like.
Press "RPT/3"buttonf or the first time.it will repeat playing the same track for mp3 and WMA or a same
Video File", RPT" 1 appears.
Press "RPT/3"buttonf or the second time.it will repeat playing the same AV directory ,"RPTD IR"
appears.
Press "RPT/3"buttonf or the third time. The entire directory for audio or video will repeat playing ,
"RPT ALL" appears.
Press "RPT/3"button for the forth time to off the repeat playing function, "RPTOFF"appears.
SCANNING TRACK AUTOMATICALLY
During Mp3 or WMA songs playback, press „INT/2" button, to play the first 10 seconds of each
Track, The display will show „ INT" , track number. Which indicates INT function is already
activated. Press „INT/2"button once again to return to normal playback.
NOTE: INT doesn' t work during playing video file.
PLAYING TRACKS IN RANDOM ORDER
During playback, press „RDM/4" button,and „RDM" appears on the display, which indicates RDM
function is carried out. The unit plays any track at random. Press RDM once again to return to
normal playback mode.
STOP PLAYING
During playback, press ( 11) „ 5STOP" button to stop the playback, TFT will show „STOP" .
Press the button once again To return to normal play mode, press „ „ button again.
PAUSE THE PLAYBACK
During playback, press ( 11) „ 1PLAY" button to suspend the playback, on the TFT display
and show „PAUSE" ,To return to normal play node by press it again.
VIDEO SETUP
While you watching Video or picture. you can enter "VIDEO SETUP"
to adjust the picture quality. IF the picture appear to disorder when
you adjustment. Please come into the "SYSTEM SETUP"select the
"DEFAULT" menu, then press the knob of VOL +/- to confirm the value
of factory recognize tacitly.
EN
BACK VIEW SETUP
Put the unit back view control view connect to power 14.4 V negative grounded electrical system.
Connect car back view camra output to the "BACK VIEW VIDEO" input.When you backward your
car. The back view picture will automatically turn to the front screen.
DOS (Dynamic Open Screen - wygaszacz ekranu)
The Dynamic Open Screen (Motion effect) when unit power on. Press any key to stop and
return to the current mode.
DEMO ON: Long press SEL key, select Setting--> System --> Demo, press SEEK +/- to set ON.
Dynamic open screen mode repeat.DEMO ON mode used to demonstration. All buttons
are not workable except „SEL" button.
DEMO OFF: Press SEL key, press SEEK +/- to set RGB drmo Off, then back to default status.
9