Installing The Front Panel; Detaching The Front Panel; Cleaning The Connector - Peiying PY-9348 Bedienungsanleitung

INSTALLING THE FRONT PANEL

To install the front panel, insert the panel into the housing and make sure the panel
is properly installed, otherwise, abnormalities occurs on the display or some keys will not function
properly

DETACHING THE FRONT PANEL

Press REL but ton in the upper left
cor ner , and hen front panel will not
funct ion proper ly.
RE LE AS E

CLEANING THE CONNECTOR

If the connector between the main unit and the front panel is dirty, it may result the unit in
abnormal working condition. To avoid such problem happening , please detach the front
panel, and clean the connector with an alcohol swab. Gently clean and avoid damaging
the connector.
EN
NOTE: For safekeeping, always shut down the generator and take out the key from the ignition before cleaning. And never
keep your finger of any metal device in touch with the connector directly.
22
Owner's manual
B
A
REMOVING THE FRONT PANEL
When the front panel was turned down
to a pos ition of 90 , hold and slide the
front panel to left, and then pul l it out .