Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OpERATION
Safety
2.
Safety
2.1
Intended use
The non-pressurised mono lever mixertap is intended for use with
a non-pressurised, vented oversink DHW cylinder.
- MEK-K for sinks
- MED-D for baths and showers
The product is designed for domestic use. It can be used safely
by untrained persons. The appliance can also be used in non-do-
mestic environments, e.g. in small businesses, as long as it is
used in the same way.
Any other use beyond that described shall be deemed to be out-
side the intended use. Observation of these instructions and of
instructions for any accessories used is also part of the intended
use of this appliance.
2.2
General safety instructions
WARNING Burns
During operation, the tap can reach temperatures in ex-
cess of 60 °C.
There is a risk of scalding at outlet temperatures in ex-
cess of 43 °C.
www.stiebel-eltron.com
Property damage
!
Whilst the water in the hot water boiler is being heated,
expansion water will drip from the spout.
Scale build-up can block the spout and thus subject the
hot water boiler to pressure.
f Never seal or block the spout.
2.3
Test mark
In line with State Building Regulations in Germany, a general test
certificate for the appliance has been applied for as verification of
its suitability regarding noise emissions.
3.
Operation
1 Tap lever
2 Diverter valve: Spout and hand shower
1
2
MEK-K | MED-D |
17
Werbung
