Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Multifunction Installation Tester/English
5.2.6-RCD Function Menu Operation
Main Display
RCD AUTO
Menu Display
F1 Button:
Pop-up and shutdown RCD menu, Shutdown mode is activated when
F2 Button:
Pop-up and shutdown Trip Current menu, Shutdown mode is activat
F3 Button:
Pop-up and shutdown Type of RCD menu, Shutdown mode is activat
F4 Button:
Pop-up and shutdown Type of 0°/180° menu, Shutdown mode is acti
Up Button:
Up menu to select the current active sub-options.
Down Button:
Down menu to select the current active sub-options.
Enter Button:
Con rm the user select mode.
20
Other
the user selects.
ed when the user selects
ed when the user selects
vated when the user selects
5.2.7-Using the VOLTAGE Function
WARNING!
Do not use on a circuit whose voltage either L-L
or L-N exceeds 550V Measuring the Voltage and
Frequency
1-Connect the test lead input terminal
2-Turn the rotary switch to the VOLTAGE position
Do not attempt to measure when the input voltage
is above 500V a.c.
Value at the top right hand corner represents the
Voltage, and the value in the right hand center
represents the frequency.
The display will appear without the TEST button
operated.
5.2.8-Using the Phase Sequence Function
Determining the Phase Sequence
1-Turn the rotary switch to the VOLTAGE position
2-Press F1 to make symbol is displayed
3-Connect the test leads L1, L2, L3 as shown on
the Figure 22
-When the instrument is energized the sequence
will be displayed automatically
Multifunction Installation Tester/English
Figure 20 Screen while measuring Voltage
and Frequency
Figure 20 Screen while measuring Voltage
and Frequency
Figure 21 Initial screen of the Phase
Sequence Measurement
21
Werbung
