Chapman MG250 Anleitung Seite 8

Maintenance & Service
Tyre Pressures
Recommended Tyre Pressure: 0.35-0.55 Bar [5-8psi]
Depth Adjustment Screw
The depth adjustment screw should be lightly greased on a monthly basis, to ensure continued smooth operation through the machine life. A
light coating of standard grease applied with an old rag or similar is ideal for this.
Spring Tine Wear
The spring tines should be checked for signs of damage or excessive wear on a monthly basis. The spring tines should be replaced if excessive
wear or damage is apparent – replacements are available through your dealer or direct from the manufacturer. Replace once wear exceeds
50mm.
8
English