Chapman MG250 Anleitung Seite 3

Description
The MG250 is a attachment designed to be towed by a suitable vehicle such as a 4x4, UTV or ideally an ATV and is able to tackle most arena
surface types.
With a 2.3m working width, you can spend less time maintaining your arena and more time actually using it. Built from heavy duty box section
steel, with easily replaceable wearing parts, and top quality galvanised finish, the MG250 will withstand years of use.
These machines should however only be used to perform tasks for which they were designed - use of the machine for any other function may be
both dangerous to persons, and potentially damaging to components. Use of the machine beyond the stated usage may invalidate any applicable
warranty, as well as being potential in breach of applicable safety regulations.
Identification
Each machine is fitted with a serial plate (shown below) which details the
following:
1. Model
2. Date of Manufacture (DOM)
3. Serial Number
4. Mass
When enquiring regarding spares or additional equipment, ensure you have
this information to hand.
Implement Decals
If your implement does not contain all of the decals shown below, please contact Chapman Machinery for replacement decals before use. Note:
All decals must be present and visible. It is imperative that these are replaced if damaged to prevent potential harm to users.
CAUTION - Read operators
manual before handling this
machine. Observe instructions
and safety rules when
operating.
3
English