Werbung
Verfügbare Sprachen
Verfügbare Sprachen
16
www.electrolux.com
If you deactivate the hob
while AUTO is running, the
function will be remembered
for the next cooking session.
Hood timer
Use the function to specify how long the
hood should operate.
It is not possible to set the hood timer
while the hood is deactivated.
1. Press
bar.
2. Press
minutes).
3. Press
The timer begins to count down.
• Once the timer finishes counting
down, the hood stops operating.
• It is possible to set the hood timer
while AUTO is on. If AUTO
deactivates the hood before the set
time runs out, the timer will be reset.
• If the timer deactivates the hood
before AUTO, the function will be
switched off. The indicators above 0
and AUTO will disappear.
• In both cases AUTO will be activated
next time you switch on the hob.
Boost
The function activates the hood fan at its
maximum speed level.
1. Press
A signal sounds and an indicator above
the symbol appears.
2. Press
function, if needed.
The function can operate uninterrupted
for a maximum of 10 minutes. After that
time the fan speed setting automatically
changes to 3. You can activate the
function again, if needed.
Breeze
The function sets the hood fan to an
extra low speed. The fan starts running
at a minimum noise level immediately
next to the hood control
or
to set the time (00-99
to start the timer.
to activate the function.
again to deactivate the
after the function is activated. Use the
function after cooking to remove any
lingering smells.
To activate the function when the hob
is off:
1. Press
.
A signal sounds and an indicator above
the symbol appears. A timer set to 60
minutes appears on the display next to
the hood control bar.
2. Adjust the timer using
needed.
After the timer finishes counting down,
the hood deactivates automatically.
Auto Breeze
The function automatically sets the hood
fan to continue running after you finish
cooking and switch off the hob. The fan
runs at a minimum speed level for
maximum 20 minutes. The function
removes any lingering smells after
cooking.
When you use the hob for the first time,
the function is activated by default.
When the function operates, the indicator
above AUTO appears. The remaining
runtime is visible on the hood timer
display. It is not possible to adjust the set
time. Once the cycle is over, the fan
switches off automatically.
To deactivate the function while it is
running:
Press AUTO or 0 on the hood control
bar.
The hood fan deactivates.
To disable the function completely:
1. Enter the menu: press and hold
for 3 seconds. Then, press and hold
.
2. Press
on the front timer until dF
appears on the display.
3. Press
or
on the front timer until
Off (--) appears.
4. Press
to exit.
or
, if
Werbung
